Prints on film 3M™ | Avery® | Neschen | LG Hausys | HP | Ikonos

The latest technology of print: HP latex of the third generation, highly resistant to scratch and UV radiation (exceeds with parameters such as durability of print from hard solvent maintaining the highest photo quality, even in production modes).
Capacity: 50 m2 (HQ mode - photo quality) - 75 m2/h (production mode) = 1200 m2 - 1800 m2/24h
Machine Park: the latest innovative plotters for latex print HP latex 360 printing in photo quality. Precise plotters cutting along the contour of SUMMA. Reliable laminators KALA Mistral.
Experience: 15 years in the sector.

All prices are in EUR without taxes (EU export) LOCO/EXW POLAND.


3M MCS Warranty logo

We are a certified manufacturer of latex prints on 3M film covered by 3M™ MCS™ Warranty

Drukarnia DPSprint.eu is the property of Agencja Reklamowa CONTACT, which as the second company in Poland meets high quality standards and has passed the whole certification process of 3M™ MCS™ Warranty programme positively. Our products in HP latex technology on 3M™ film are covered by international warranty of the manufacturer: 3M film and 3M protective laminates on approved printers, including HP Latex.

 

Monomeric (short- and medium-term) self-adhesive film for flat surfaces:

 

Avery® MPI seria 3000 is a monomeric film 95 mic of very good quality. Available in versions: gloss white or matt white and gloss transparent.
Avery® is a world leader in production of monomeric self-adhesive film with permanent adhesive. Perfect for print of high quality. It is characterised by simple application on flat surface and light embossing, perfect adhesion to surface such as: PVC, zinc plated sheet, glass. In case of high exposure to UV and damage we recommend lamination with laminate dedicated to the film Avery® DOL seria 3000 (gloss or matt), which will protect our print against mechanical damage perfectly.

Application: Short- and medium-term plates and signboards - glass stickers, Plexiglas, PVC, zinc plated sheet, shop windows. Cost-effective application for wrapping of cars with flat surface (e.g. commercial vehicles without embossing), applied often for cost-effective wrapping of buses and trams.

Material Large format print. Material plus print.

Avery® MPI 3000 series:

 

MPI 3000 Gloss White

MPI 3020 Matt White

MPI 3040 Gloss Transparent
 

price for 1 m2  print in latex print technology - HP latex.
1 - 10 m2 over 10 m2 Prices for regular customers and Advertising Agencies
8,25 7,00 are individually negotiated.
price for 1 m2 print in solvent print technology.
1- 10 m2 10 - 200 m2 Over200 m2
7,50 6,25 3,75

Product technical sheet: ds_avery_MPI_3000_en.pdf
Website of the manufacturer: http://graphics.averydennison.eu/

 

Neschen EASY DOT Mat is film enabling easy and fast application without participation of a group of specialists - even at wrapping large surface! In case of faulty covering, the film gives possibility of amendment with no harm to the final effect. It can be reapplied a number of times with no loss of adhesive properties of the material. Material perfect for application on: P.O.S., shopping windows, fair stands of PVC, interior and furniture decoration, interior advertisement and signage. PVC monomeric film 100 µm thick. Available in white: gloss or matt and clear mat. Dedicated to print with latex ink. High quality of colours, for application on straight and slightly curved surface. Very flexible. Strong adhesive of the film does not react chemically in contact with ink. Point adhesive Easy Dot gives the product subtle effect of carbon structure which will disappear over time. After several weeks the adhesive will spread all over the surface evenly and the sticker will become perfectly flat.

It has a special DOT adhesive - the adhesive enables easy application without bubbles and possible moving the application in another place without loss of adhesive properties of the material.
The film has B1 and M1 non-combustibility approvals.

Caution!
In case of this film, protection with liquid laminate AMT ART Verniks is used.

Application: Material perfect for application on: P.O.S., shopping windows, fair stands of PVC, interior and furniture decoration, interior advertisement and signage. The film can be also applied as self-adhesive photo wallpaper.

Material Large format latex print. Material plus print

Neschen EASY DOT Mat
(gloss and clear matt available on request)

price for 1 m2  print in latex print technology - HP latex.
1 - 10 m2 over 10 m2 Prices for regular customers and Advertising Agencies
11,25 10,00 are individually negotiated.

Product technical sheet: solvoprint-easy-dot.pdf Non-combustibility certificates: certyfikat-niepalnosci-m1.pdf certyfikat-niepalnosci-b1.pdf
Website of the manufacturer: www.neschen.com


3M MCS Warranty logo

Monomeric calendered film on flat surface (also on walls - as photo wallpaper)

 

3M™ Scotchcal™ Graphic Film IJ25​-10R i IJ25-20R is a monomeric, calendered medium-term film for digital print, 100 μm (mic). Removable acrylic adhesive. It ensures perfect durability and quality of print. It is recommended on requiring both interior and outside exposures for print in latex technology. One of the main advantages of the film is possibility of its usage and easy application without laminate (due to rigidity of the film). Durability of the film without laminate up to 3 years. It can be laminated with Laminatem Avery® DOL 3000 or polymer laminate Ikonos Profiflex LAM-PRO MPT/MPG (MPT-matt/MPG-gloss) LP75+, which will protect the print perfectly and increase its lifetime, at exposure outside (the manufacturer recommends more expensive laminate: 3M™ Scotchcal™ 40-114 series gloss transparent, 40-124 matt transparent).

Application: medium-term plates and signboards - glass stickers, Plexiglas, PVC, zinc plated sheet.. Cost-effective application for wrapping of cars with flat surface (e.g. commercial vehicles without embossing).

Caution! 3M™ Scotchcal™ Graphic Film IJ25​ can be successfully used as self-adhesive photo wallpaper for application directly on smooth, primed wall.

Material Large format print. Material plus print.

3M™ Scotchcal™ Graphic Film

IJ25​-10R - gloss white with removable pressure-sensitive adhesive.

IJ25-20R - matt white with removable pressure-sensitive adhesive.

price for 1 m2  print in latex print technology - HP latex.
1 - 10 m2 over 10 m2 Prices for regular customers and Advertising Agencies
13,75 12,50 are individually negotiated.
Net price for 1 m2 print in solvent print technology.
10 - 50 m2 50 - 100 m2 Over 100 m2
11,25 10,00 9,80

Product technical sheet: 3M_IJ25_product_biuletyn.pdf
Website of the manufacturer: www.3Mgraphics.com

 

3M MCS Warranty logo

Polymer long-term self-adhesive film on flat surface and slight curvature:

 

3M™ Controltac™ Print Film 40C-10R and 40C-20R is polymer medium-term film for digital print, 85 μm (mic). Acrylic, removable or permanent, grey or transparent adhesive of Comply™ type. Durability 7 years. Extensibility 130%.
3M™ Controltac™ Print Film 40C – Ensures perfect durability and quality of print. It is recommended on requiring both interior and outside exposures for print in latex technology e.g. car graphics, outdoor advertising, decorative graphics on glass. One of the main advantages of the film is offering high quality, no problems with print regardless of colour saturation. Film durability up to 7 years. We recommend lamination with Laminate Avery® DOL 3000 or polymer laminate Ikonos Profiflex LAM-PRO MPT/MPG (MPT-mat/MPG-błysk) LP75+, which will protect the print perfectly and increase its lifetime at exposure outside (the manufacturer recommends more expensive laminate: 3M™ Scotchcal™ 40-114 series gloss transparent, 40-124 matt transparent).

Application: Long-term plates and signboards - glass stickers, Plexiglas, PVC, zinc plated sheet, shop windows. Cost-effective application for car wrapping of flat surface and slight curvature (e.g. commercial vehicles without embossing), applied often for cost-effective wrapping of buses and trams.

Caution! 3M™ Controltac™ Print Film 40C can be successfully used as self-adhesive photo wallpaper for application directly on smooth, primed wall.

Material Large format print. Material plus print.

3M™ Controltac™ Print Film 40C

IJ 40C-10R - gloss white
with removable grey adhesive Comply™

IJ 40C-20R - matt white
with removable grey adhesive Comply™

price for 1 m2  print in latex print technology - HP latex.
1 - 10 m2 over 10 m2 Prices for regular customers and Advertising Agencies
16,25 15,00 are individually negotiated.
price for 1 m2 print in solvent print technology.
10 - 50 m2 50 - 100 m2 Over 100 m2
13,75 12,50 11,50

Product technical sheet: product-bulletin-40c.pdf
Website of the manufacturer: www.3Mgraphics.com

 

Polymer film Ikonos Profiflex PRO GPT P80+ is a cost-effective and relatively cheap solution of the Polish manufacturer. Durability 5-7 years. White polymer PVC film of the highest quality for medium-term outdoor and long-term interior applications. The film ensures high quality of print and very good colour reproduction. 80 microns thick, Finish: gloss white with transparent permanent adhesive. We recommend lamination with Laminatem Avery® DOL 3000 or polymer laminate Ikonos Profiflex LAM-PRO MPT/MPG LP75+, which will protect the print perfectly and increase its lifetime at exposure outside.

Application: Long-term plates and signboards - glass stickers, Plexiglas, PVC, zinc plated sheet, shop windows. Cost-effective application for car wrapping of flat surface and slight curvature (e.g. commercial vehicles without embossing), applied often for cost-effective wrapping of buses and trams.

Material Large format latex print. Material plus print

Ikonos Profiflex PRO GPT P80+

price for 1 m2  print in latex print technology - HP latex. Panel width: 137 cm. Net price concerns 1 m2, assuming usage of the whole width that is 137 cm (minus 5mm of margin), that is EUR 27,40 for 1 linear metre
1 - 10 m2 over 10 m2 Prices for regular customers and Advertising Agencies
10,00 8,75 are individually negotiated.

Product technical sheet: ikonos_profiflex_pro_gpt_p80+_pl.pdf
Website of the manufacturer: http://ikonos.pl/pl


Car cast film for embossing:

 

Cast film Ikonos Cast 38 is a cost-effective and relatively cheap solution of the Polish manufacturer. White, finished in gloss of 50 microns thick - self-adhesive cast film for car applications, with grey adhesive, for application in full 3D, with increased amount of adhesive for application in the most difficult places. Very good properties of ink absorption and a wide gamut of colours. Exposure durability about 5 years. To this film, the manufacturer recommends using cast laminate of 50 microns LamCast Ikonos (transparent - gloss).

Application: Long-term full-colour graphics on vehicles, means of transport. Also used at large formats. It can be applied on flat, embossed and also riveted ground.

Material Large format latex print. Material plus print
Ikonos Cast 38 price for 1 m2  print in latex print technology - HP latex. Available width: 135 or 150 cm
1 - 10 m2 over 10 m2 Prices for regular customers and Advertising Agencies
16,25 14,50 are individually negotiated.

Website of the manufacturer: http://ikonos.pl/pl

 

3M MCS Warranty logo

3M™ Controltac™ IJ180Cv3-10 Comply™ v3 is the comprehensive cast film of the highest quality of 50 microns thick, for digital print – long-term of durability of 10 years - extensibility 125%. Film finish: gloss white with positionable activated by pressure adhesive Comply™ version 3. It has invisible venting channels facilitating and accelerating the application.

The film surface absorbs print perfectly, giving homogeneous coverage, subtle shading and sharp contours of images. Outstanding, the largest in the market, film flexibility makes the product perfect both for applications on the most difficult surface including two-way embossing. The film properties cause it is the best material applied on the most difficult vehicles. It is equipped with grey, repositionable acrylic adhesive of Controltac type, which ensures great coating properties of the film without cover gaps. The adhesive is activated by pressure which allows for moving the graphics during application until it is placed properly. Another asset is also fast and without adhesive remnants, removal of film from the body by heating e.g. after finishing the advertisement exposure.

Caution!
We do not recommend using the printed film on vehicles without lamination. We recommend using cast laminate. To this film we use verified cast laminate 3M™ SCOTCHCAL™ 8518 (transparent - gloss) or on request 3M™ SCOTCHCAL™ 8520 (transparent - matt). A more cost-effective solution can be also applied: cast laminate: 50 microns LamCast Ikonos (transparent - gloss) of durability of 7 years.

Application: Long-term full-colour graphics on vehicles, means of transport. Also used at large formats. It can be applied on flat, embossed and also riveted ground.

Material Large format latex print. Material plus print
3M™ Controltac™ IJ180Cv3-10 Comply™ v3 price for 1 m2 print in latex print technology - HP latex. Panel width: 137 cm. Net price concerns 1 m2, assuming usage of the whole width that is 137 cm (minus 5mm of margin).
1 - 10 m2 over 10 m2 Prices for regular customers and Advertising Agencies
20 18,5 are individually negotiated.

Product technical sheet: IJ180_180Cv3.pdf
Website of the manufacturer: www.3Mgraphics.com


3M MCS Warranty logo

NOVELTY! Graphic cast film 3M™ Envision™ 480Cv3 dedicated to the most difficult applications.

Revolutionary technological solutions, more eco-friendly.

Film 3M™ Envision™ 480Cv3 is not only film without PVC, but also a completely new respond to the most difficult surface for application and climate challenges. Film for print 3M™ Envision™ combines the best features of the key premium products such as IJ180Cv3, IJ380Cv3 for deep embossing, they are perfect both in applications on vehicles, trailers, boats and also on textured plaster. Its key features are: extensibility up to 150%, possibility of application in high and low temperature, ease of application and removal, possibility of reposition and exceptional durability. All this while keeping pro-ecological character.

New features and benefits: half as fast application on embossing, fitting on request, extensibility up to 150%, even easier application - even in extreme temperature, exceptional gloss, laminate transparency 8548G and vivid colours, resistance to scratch during application, faster removal, higher resistance to tear, green solution - film without PVC, film without phthalates, partly made of biodegradable material, manufactured using by 60% less solvent, manufactured without the use of chlorine or heavy metals.

Plus innovation 3M, which you already know (from film IJ180Cv3, IJ380Cv3) and value: adhesive Comply v3 enables easy removal of air from below the applied film, perfect quality of print, possibility of moving, repositioning, permanent fitting after heated, sense of security owing to products 3M™, MCS™ programme warranty – the most extensive warranty on the ready graphics in the whole sector. It gives sense of security to manufacturers and end customers. Read more about 3M warranty on the website: www.3M.pl/reklama

Caution!
We do not recommend using the printed film without lamination. We recommend using cast laminate. To this film we use dedicated cast laminate 3M™ Envision™ 8548G.

Application: Universal graphic film - advertisement on vehicles, boats, textured plaster and a lot of other surface of deep embossing.

Material Large format latex print. Material plus print
Film 3M™ Envision™ 480Cv3 price for 1 m2 print in latex print technology - HP latex. Panel width: 137 cm. Net price concerns 1 m2, assuming usage of the whole width that is 137 cm (minus 5mm of margin), that is EUR 33,91 for 1 linear metre.
1 - 10 m2 over 10 m2 Prices for regular customers and Advertising Agencies
25,75 23,75 are individually negotiated.

Product sheet: 3M_Envision_480Cv3_PL.pdf Brochure: 480Cv3_Brochure_EU.pdf Operating instructions: instruction-bulletin-480cv3.pdf
Website of the manufacturer: www.3Mgraphics.com

We provide services of covering exterior building facades with film 3M™ Envision™ 480Cv3. Application on brick wall or textured plaster! We cover the building with film from the outside, If you are interested, contact us +48 501 493 107.


Window film One Way Vision:

ImagePerfect™ IP 2701 perforated Window OWV Film, 60/40, 140μ is a window graphics film perforated on the whole surface. After applied on the glass, only graphics is visible from the application side. Owing to perforation, when looking from the back, we can see what is on the other side - visibility is limited only to a slight extent. Durability up to 2 years outside.

Application: This film is widely used on public transport, shopping windows, glass office elevations, showrooms and petrol stations.

Material Large format solvent print. Material plus print.
ImagePerfect™ IP 2701 perforated Window OWV Film, 60/40, 140μ price for 1 m2 print in latex print technology - HP latex.
1 - 10 m2 over 10 m2 Prices for regular customers and Advertising Agencies
10,00 8,75 are individually negotiated.
price for 1 m2 print in solvent print technology.
10 - 50 m2 50 - 200 m2 Over 200 m2
8,75 7,50 are individually negotiated.

Product technical sheet: datasheet_IP2701_UK_tcm34-5504.pdf
Website of the manufacturer: www.spandex.com


Backlight film - backlite:

 

LG Hausys LD4910  is 5-year old self-adhesive, polymer, white PVC film of high quality, translucent, matt intended for full-colour print in backlit graphics. It absorbs colours perfectly, and owing to application of technology of latex print and specially selected colour profiles it does not fade during backlight maintaining saturated colours.

Caution!
We recommend lamination of film with Laminate Avery® DOL 3000 series (gloss or matt), which will protect the print perfectly and increase its lifetime at exposure outside by at least another 3 years.

Application: backlit advertising boards, citylights, lightboxes, panels, flat and uneven surfaces.

Material Large format latex print. Material plus print
LG Hausys LD4910 price for 1 m2 print in latex print technology - HP latex.
1 - 10 m2 over 10 m2 Prices for regular customers and Advertising Agencies
16,25 15,00 are individually negotiated.

Product technical sheet: LD4910_Print_en.pdf Brochure: LD4910_en.pdf Application instructions: Installation_Guide_Printing_Media_en.pdf
Website of the manufacturer: http://sign.lghausys.eu

 


HP Backlit Polyester Film is rigid - 285 g/m2 - matt film PET, polyester (without adhesive) intended for backlit graphics, ensures an eye-catching graphic effect of high quality. Latex print technology ensures bright, rich colours and enables fast exchange of advertisement in points of sale. Graphics on the film is dry and prepared for instant use after printing.

Caution!
We recommend lamination of film with Laminate Avery® DOL 3000 series (gloss or matt), which will protect the print perfectly and increase its lifetime at exposure outside by at least another 3 years.

Application: backlit advertising boards, citylights, lightboxes, panels, flat and uneven surfaces, backlit frames and snap frames.

Material Large format latex print. Material plus print
HP Backlit Polyester Film price for 1 m2 print in latex print technology - HP latex.
1 - 10 m2 over 10 m2 Prices for regular customers and Advertising Agencies
22,50 21,25 are individually negotiated.

Product technical sheet: HP_backlit_polyester_film_en.pdf
Website of the manufacturer:www.hp.com